How To Install Windows By Network
Overview of PXE PXE (Pre eXecution Environment), affectionately pronounced Pixie (as in fairy dust), is a method of having an end computer (client) boot using only its network card. This method of booting was created way back in 1999 and as long as the computer in question is connected to the network (and supports this standard), it is possible to circumvent the normal boot procedure (I.E. Power on –>BIOS –>HD/CD) and do some nifty stuff starting from troubleshooting, to using a liveOS and even re-imaging the machine. But we are getting ahead of our selves lets get. When using PXE the boot process is changed from the normal order to: Power on –>BIOS –>Network Card’s PXE stack –>Network Boot Program (NBP) downloaded using TFTP from server to Client’s RAM –>NBP’s responsibility to perform the next step (a.k.a. 2nd stage boot).
It is therefore ideally suited for both diskless and thin clients. CCBoot support install windows xp over lan and install windows xp over network. For LAN boot solution, the boot process is as bellow: 1, Power on,; 2, Load BIOS,; 3, PXE stack built-in the NIC (Network Information Center),; 4, Download NBP (Network Boot.
Using the “” NBP, it is possible to setup the server for more then just one PXE boot program for our clients. In a sense, it is the secret ingredient that enables us to perform all of the above and then some. For a more in depth explanation of the entire process, its history and some of the infrastructure options it and gPXE (which is a more evolved cousin) enable, see from their developers.
Also, below is a video of a setup from 2008 that quickly goes over some of the boot possibilities. Note: In this video, the deprecated UDA project is used as the base for the server, and the annotations were aimed to explain to a friend the (at the time) recent additions made to it. Goal This guide will be the first of a series of guides about PXEing.
In this guide, we will lay the foundations which we will build upon in future articles. Recommendations, Assumptions and Prerequisites • The client machine you are testing with, and you know how to enable it.
• This guide was written and tested using Debian Squeeze, Ubuntu server 9.10 and Linux Mint10. Therefore it is assumed that you have a Debian based system to work with as well. • You may want to have a look at and, because the disk and network bandwidth demands on this kind of a server can get real high real fast. Building on the foundation of a server with high resiliency for its network and disk subsystems is highly recommended. • You will see me use VIM as the editor program, this is just because I’m used to it you may use any other editor that you’d like. Installation – The heavy lifting by leveraging FOG is a free, open source computer cloning solution created by *. Takes regularly available software (like Apache, MySQL and tftpd-hpa to mention a few) and packages them into a free and productized PC Lifecycle management (PCLM) solution.
Using this free PCLM it is possible to backup a computers state by imaging it, deploy programs and settings (I.E. Firefox, Office, Printers & etc’) and configuration policies (I.E. Automatic logoff and screen saver settings) to mention a few, through one central web interface. Note: An interview with Chuck and Jian about FOG is available at the. Using FOG as the foundation for your PXE server, is a great shortcut to having all of the necessary parts like TFTP and if required, DHCP in place without having to install and configure them manually, while granting you all of FOG’s functionality as a bonus. As our goal is to add functionality to this already great system, we will not cover how to use FOG itself, nor its installation procedure in depth., with their written & is sufficiently robust to get the in depth information, if you want to geek through it. China Mobile Imei Changer Software.
The summarized steps are: • sudo mkdir -p /opt/fog-setup cd /opt/fog-setup • Download the from sourceforge to the directory created in the previous step. • Extract the package and start the installation. Sudo tar -xvzf fog* cd fog* cd bin sudo./installfog. Helical Gear Design Program. sh • You will be prompted several times by the installer: 1.
What version of Linux would you like to run the installation for? – 2 (again, assuming a Debian based system is used) 2. What type of installation would you like to do? [N] – Enter 3. What is the IP address to be used by this FOG Server?
[ server-IP-detected-on-eth0] – Enter. Would you like to setup a router address for the DHCP server?
[Y/n] – Enter. Would you like to setup a DNS address for the DHCP server and client boot image? [Y/n] – Enter. Would you like to change the default network interface from eth0? If you are not sure, select No. [y/N] – Enter.
Would you like to use the FOG server for dhcp service? [Y/n] – *Enter 8.
This version of FOG has internationalization support, would you like to install the additional language packs? Are you sure you wish to continue (Y/N) – Y. Acknowledge and follow the on screen instructions for “MySQL “.
Leave the MySQL password blank for the root account. Would you like to notify the FOG group about this installation? – Y (recommended) Image from the FOG wiki.
• Go to the Fog address with your browser and follow the on screen instructions. * Note: Assuming you do NOT have another DHCP or that it is not setup to handle PXE. If you want to configure your existing DHCP, see. As far as installing FOG goes, that should be it. Again, while FOG is a great system, using it, is not the focus of this guide, and we encourage you to head over to it’s wiki so you can get a better grasp of FOG’s abilities and how it can help you to manage your clients lifecycle. If all when well you should be able to PXE boot your client machine (usually F12) and get greeted by FOG’s default menu. Image captured by Hotfortech.
As a quick “” you may select the “Run Memtest86+” option and get greeted by the Memtest program we covered in our ” guide. File and directory Structures As stated earlier, our aim is to extend FOG’s abilities and to that end we will need to add some files and directories.
Create the subdirectory structure: sudo mkdir -p /tftpboot/howtogeek/menus sudo mkdir -p /tftpboot/howtogeek/linux sudo mkdir -p /tftpboot/howtogeek/pics sudo mkdir -p /tftpboot/howtogeek/utils These sub-directories will serve as templates for all the pictures, programs and configurations we will use to extend FOG. Adjusting the “default” configuration file We will build a new main menu, and put all of the FOG functions into their own sub-menu.